A tough, non yellowing, water based interior/exterior gloss enamel that is fast drying, low odour and easy water wash up.

Subtle undertones of beige cream, coffee and green combine beautifully with a collection of understated whites to form a textural experience that is Dulux Suede Effects. Dulux Suede Effects is a flat interior water based paint which is applied direct from the can to achieve a stylish finish which echoes the look of suede. Easy to apply, Dulux Suede can also be used for ragging and sponging.

For interior and exterior timber, masonry, and metal. This high quality full gloss solvent based enamel has excellent hiding power, is knock and scratch resistant and retains its toughness and colour longer in the harshest environment. Note: Enamels will yellow in the dark, hence discolouration of WHITE will occur and is a natural product characteristic.

A Super Premium quality, highly washable, low sheen acrylic wall paint. Formulated for easy application, high covering power and minimal spatter. Dries to a smooth low sheen finish, which gives best washability without being too glossy.

An opaque, tough, durable, water-based coating specially formulated for new or weathered timber decking, verandahs and other walk on surfaces. A durable low sheen finish, incorporating a combination of ultra violet (U.V.) absorbents for extreme weather protection and powerful anti-fungus agents to inhibit mould and algal growth. No primer or undercoat is necessary on most surfaces. Dries to a tough wear resistant low sheen surface that is hard enough to walk on after 2 hours.

A clear, water-based acrylic protective coating, available in both Gloss and Low Sheen finishes. Forms a clear, non-yellowing coating which does not darken on ageing. Protects against marks and stains and may be sponged clean with mild soapy water. Do not scrub or use strong detergents.

Brite-Glo Gloss Acrylic is a super-quality full gloss acrylic, designed to give excellent flow and covering power, with exceptional exterior durability. Dries quickly to achieve rapid results. Made in a unique strong bright colour range from carefully selected premium light fast pigments, without the use of lead-based materials.

Brite-Glo Enamel is a super-quality heavy bodied brilliant gloss enamel designed to give maximum film build, flow and covering power. Dries quickly to a smooth, hard finish. Made in a unique strong bright colour range from carefully selected premium light fast pigments without the use of lead-based materials.

Brite-Glo Low Sheen Acrylic is a water based acrylic, which dries to a subtle low sheen finish. It is available in a range of bright and strong colours with excellent opacity and durability. Highly flexible, but will not become sticky on plasticised vinyls. Suitable for a wide variety of specialist and feature work.

Brite-Glo Scenic Flat Acrylic is a premium quality flat acrylic water based paint, designed for a wide range of architectural and decorative purposes. Made in a unique strong bright colour range, which can also be blended to give a very large colour range. Available as clear Bronzing Medium and metallic powders to achieve metallic effects. Also available as SOLVER Line 4651 Brite-Glo Scenic Aquatect in Gloss and Low Sheen, a water based protective clear coat.

Brite-Glo Scenic Fluorescent Flat Acrylic is a flat acrylic water based paint in brilliant fluorescent colours, designed for general use wherever fluorescent highlighting or decoration is required. Fluorescent colours work by collecting incoming light and U.V. and converting it into light of their specific colour, so they appear brighter than their surroundings. Fluorescent colours are very transparent and work by light passing through the film. Therefore they need to be applied over a white background to achieve the desired effect.

A solvent thinnable enamel, which dries to a low sheen finish. Incorporated in the product is an abrasive which enables the coating to accept chalk writing.

A solvent thinnable enamel, which dries to a low sheen finish. Incorporated in the product is an abrasive which enables the coating to accept chalk writing.

A flat, semi-opaque quick drying stain for hard wearing areas. It has an alkyd resin base which dries harder and faster than the longer weathering oil base stains. When dry, SOLVER Line 4824 Decking & Outdoor Furniture Stain is non-toxic and does not contain wax so it can be recoated with paint or clear coatings. All colours are made from fade resistant oxide pigments which give the utmost durability and colour retention. DO NOT use untinted. Where more than one can of SOLVER Line 4824 Decking & Outdoor Furniture Stain is required to complete a job, combine contents in a clean metal container and stir well before using. When using these products tinted, different coloured timbers can cause a wide variation in colour. Prior to application test the colour on a timber off-cut or a part of the job that does not show. For interior or exterior use, eg. outdoor furniture, decking and other areas that require a fast drying stain that will withstand more than the usual amount of hard use. Should not be used on timbers that are not suitable for exterior exposure. Superior performance is obtained on Western Red Cedar or California Redwood, less durable timbers will require coating more frequently. On extremely hard timbers, performance will be reduced due to lack of penetration and therefore maintenance will be required more often. Similarly on surfaces subject to continued wetting and drying (eg. decks around pools, gardens and lawns) will require more regular maintenance.

SOLVER Decking Oil is an easy to use penetrating oil designed to protect and enhance the natural beauty of exterior timber decking. It has been formulated to highlight the timber grain and produce a natural timber-look finish. SOLVER Decking Oil contains active fungicide to provide maximum protection against discolouration caused by mould growth. It also contains wax for improved durability and water repellency. SOLVER Decking Oil is a penetrant not a coating, and as such will require more regular maintenance than a paint finish. If a high gloss surface coating type finish is required, other products in the SOLVER Timber Finish Range are more suitable for achieving this effect. Where more than one can of SOLVER Decking Oil is required to complete a job, combine contents in a container and stir well before using.

Haymes Rendercoat is a highly durable, interior/exterior water-based 100% acrylic, pigmented textured coating which is resistant to extremes of weather and to mould and fungal growth. This product has excellent adhesion to virtually any building surface, providing it is properly prepared.

Designer Finishes Suede is a rich, Ultra Premium paint that dries to a soft matt finish, delivering a textured, sophisticated look. This water-based product is perfect for feature walls and is available in an extensive range of fashionable colours.

Add colour and texture to your outdoor walls with Dulux Fine Texture. Achieve a fine, sandy textured finish, ideal for smooth, outdoor masonry feature walls. Tintable to your colour of choice.

Provides added protection and extended durability for Dulux Suede and other low gloss paints. A specially formulated interior, clear matt finish, designed to enhance and extend the life of Dulux Suede finishes in high traffic and wet areas.

Add colour and unique texture to your outdoor walls with Dulux Medium Texture. A bagged render texture finish, its ideal for smooth or bricked masonry outdoor feature walls. The finish can be varied depending on the finishing technique used (sponge, mitt or brush). Tintable to your colour of choice.

Dulux Metallic is a decorative finish that exhibits a subtle polished sheen. This dynamic finish offers dimension to your room by reflecting an increased amount of light from its contemporary and popular colour palette of 20 silvery hues and natural greens. Metallic is a semi gloss, water-based product for use on interior walls, doors, trims and furniture. Dulux Metallic contains metallic flakes, and as a result the end finish will vary dependent on application method, lighting level and viewing angle.

Create a lustrous, mother-of-pearl finish using translucent Dulux Pearlustre. Dulux Pearlustre comes in 5 exclusive colours. Pearlustre is a semi gloss, water-based product. This luxurious quality sheen is ideal for interior walls as well as more creative uses such as application onto canvas household accessories. The finish will vary dependent on application method, lighting level and viewing angle.

Add a brushed textural dimension to your exterior walls with Dulux Tuscan. This soft, washed look has been designed to stand the test of time because unlike lime-based finishes, it wont streak from water staining. Tintable to your choice of colour.

A Super Premium quality opaque, water based coating formulated for a wide range of exterior uses. An absolutely outstandingly durable finish for the ultimate weather protection. Also contains powerful anti-fungus agents to inhibit mould and algal growth. Also available in Low Sheen and Gloss finishes.

Resene Enamacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing, fast drying and has much lower odour than solventborne counterparts.

Resene Enamacryl Metallic is a breakthrough product that may be used in all those areas traditionally reserved for solventborne enamels to achieve a metallic effect.

Resene Hi-Glo is based on a unique waterborne emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces.

Berger Jet Dry True Grip is a specially formulated non-slip additive for Jet Dry paving paints. Its fine, grained particles are added directly to the paint product and then applied straight to the concrete surface. It's incredibly easy to use and adds a higher level of wet weather protection and supreme slip resistance to the Jet Dry range.

Resene Lumbersider is a waterborne satin based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Imparts a natural satin look that is fully washable.

Resene Lusta-Glo dries to a beautiful, even, silky semi-gloss finish. Based on a tough flexible alkyd resin to give fast drying and maximum durability in all hardwearing areas.

Resene Lustacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing, fast drying and has much lower odour than solventborne counterparts

Brite-Glo Scenic Flat Acrylic is a premium quality flat acrylic water based paint, designed for a wide range of architectural and decorative purposes. Made in a unique strong bright colour range, which can also be blended to give a very large colour range. Available as clear Bronzing Medium and metallic powders to achieve metallic effects. Also available as SOLVER Line 4651 Brite-Glo Scenic Aquatect in Gloss and Low Sheen, a water based protective clear coat.

Resene Multishield+ is a tough waterborne glaze for use on masonry and brick surfaces as a protective finish and glaze. Enhances the colour and natural beauty of masonry, brick and stone. Increases the durability of high build acrylic specialist coatings. Provides an exceptionally tough, scrubbable film for the protection of wallpaper.

Peel Away is a unique paint removal system for the removal of multiple layers of common old paints.

Peel Away Neutraliser is a concentrated liquid compound that will neutralise alkaline residues left on the surface after being stripped by Peel Away 1. DO NOT USE FOR ANY OTHER PURPOSE.

Haymes Rendertex Coarse is a highly durable, interior/exterior water-based 100% acrylic, pigmented textured coating which is resistant to extremes of weather and to mould and fungal growth. This product has excellent adhesion to virtually any building surface, providing it is properly prepared.

Haymes Rendertex Fine is a highly durable, interior/exterior, waterbased 100% acrylic pigmented textured coating, which is resistant to extremes of weather and to mould and fungal growth. It is designed for application using a roll-on technique. Various finishes may be obtained by using different rollers.

Haymes Rendertex Render Patch Coarse is an exterior pre-mixed 100% acrylic paste filling compound. Product exhibits resistance to extremes of weather, atmospheric attack and shows a high resistance to moulds and fungi. It has excellent adhesion to virtually all building surfaces, providing they are properly prepared.

Haymes Rendertex Render Prime is a waterbased100% interior/exterior acrylic pigmented based sealer. This product has the flexibility to contract and expand on the surface it is applied to and is resistant to all mould and fungal growth.

Haymes Rendertex Render Proof Membrane is an interior/exterior acrylic rubber-like coating for use on all porous surfaces including plasterboard, concrete, masonry, brickwork and render. This product exhibits resistance to extremes of weather and to moulds and fungal growth.

Resene SpaceCote Low Sheen is the result of long, careful, intensive research. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a low sheen finish without sacrificing durability. So adaptable that it may also be used on joinery and trim, both inside and out.

Resene Super Gloss is based on a tough, flexible solventborne resin for fast drying and maximum durability in all hardwearing areas. Easy to apply and dries to a mirror gloss finish.

Wattyl ESTAPOL 7008 is a two pack polyurethane, high gloss clear coating, ideally suited for interior wood surfaces where extreme resistance and durability is required. Suitable for interior use only. Outstanding hardness and durability. Protects and beautifies interior timber floors, panelling, architraves, bench tops, and built-in furniture. Highly resistant to abrasion and chemical action.

Wattyl Pascol Acrylic Sealer Undercoat is 100% acrylic and has excellent adhesion to most surfaces. Suited for interior and exterior use. Is touch dry in 30 minutes and can be recoated after 2-4 hours.

Wattyl Solagard Gloss is designed for easy applicaton in a variety of conditions, and it dries to a rich, even gloss finish. Use On: Exterior timber, cement render, brick, fibre cement, masonry, ZincalumeŽ and galvanised iron sheet. Suitable for roofs used for collection of drinking water.

Wattyl Weathergard Marine Varnish is a high gloss timber finish specially developed to protect exterior marine timber from the harsh elements. Weathergard Marine Varnish provides powerful UV absorption for longer lasting protection from salt water spray, wind and UV rays and protects timber from darkening and discoloration

Resene Zylone 20 is a unique combination of resins and pigments producing a dead flat film. Its ease of application and durability makes it an ideal choice for modern interior decor. A very low odour product.

Resene Zylone Sheen is the result of advanced technology that produces a smooth yet ultra tough surface. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. A very low odour product.