A water based vinyl latex ceiling coating with a flat finish for minimising reflection of light from surface imperfections.

A high quality low sheen 100% acrylic finish for use on interior walls.

Haymes Simply WoodCare Dexpress semi transparent decking and timber finish is a quick dry, water wash up, easy to use, two coat system. It enhances and protects timbers natural beauty with the latest developments in UV and water repellent technology and offers greatly improved durability over oil type finishes. It is available in a range of natural timber shades.

A high quality self priming, exterior grade 100% acrylic finish for use on timber, fibro, masonry and galvanised iron surfaces.

A tough, non yellowing, low odour, interior urethane acrylic lacquer available in gloss or satin suitable for timber bench tops, cork, timber and parquetry floors.

An easy to apply, low odour, 100% acrylic lacquer available in gloss or satin for general purpose interior use. Note: This product is not suitable for floors or bench tops. Use Simply Woodcare Aqualac Floor for this purpose.

This product enhances the natural timber colour while retaining transparency so that the grain shows through. Should only be used over bare timber or compatible surfaces and cannot be used over conventional painted surfaces. The product is available in a range of easily tintable timber colours.

Simply WoodCare Easy Floor Gloss is a single pack, clear, oil based coating, which will enhance and protect the natural appearance of interior timber furniture and timber and parquetry floors. Simply WoodCare Easy Floor Gloss will minimise the risk of edge bonding (gluing) on tongue and groove timber floors and is recommended where the stability of the timber floor cannot be guaranteed.

Simply Woodcare Exterior Decking Oil Natural is an advanced formulae for application to timber decking. The incorporated water repellent and anti mould and fungus and ultra violet additives further enhance the performance of the product. It preserves the natural timber appearance and provides excellent protection from weathering for most timbers including Treated Pine, Merbau and Jarrah. This product will revitalise previously stained decks. Periodic recoating with the product when decks show signs of fading and greying is recommended.

Simply Woodcare Exterior Decking Oil Tint Base is an advanced formulae for application to timber decking and can be applied to most timbers including Treated Pine, Merbau and Jarrah. The incorporated water repellent and anti mould and fungus additives further enhance the performance of the product.

A clear, high gloss finish incorporating ultra violet protection for enhanced performance. It offers excellent protection to exterior timber surfaces. Note : Where staining is required prior to top coating with Simply Woodcare Exterior GP Clear, use Simply Woodcare Exterior Deckn Timber Stain.

A high quality, single pack mineral turps based general purpose clear finish. Available in gloss or satin this product is suitable on most natural or stained interior timber surfaces. Simply Woodcare Interior GP Clear is resistant to heat, steam, wear and household spillages, including alcohol. Note: This product is not suitable for floors or wear surfaces. Use Simply Woodcare floor finishes for this purpose.

A high quality traditional dye-type stain designed to penetrate open grained timber and to enhance the natural timber grain. This dye type stain is recommended for use by tradespeople and professional applicators on cabinet timbers. Note: This product is not suitable for pine, ash and any other absorbent timbers which may give a patchy, uneven result.

A high quality, interior natural look non-slip floor finish based on Tung Oil. When applied correctly the finish will not crack or chip and can be polished using timber polish. Note: A minimum of 7 days should be allowed before timber polish is applied.

Simply Woodcare Uvex Exterior Timber Finish is a hughly durable exterior water based natural timber finish that protects and enhances the beauty of timber with a transparent low sheen finish. Uvex Exterior Timber Finish incorporates the latest technology in water based timber protection and offers greatly improved durability compared to oil type finishes.

Simply Woodcare Uvex Timber Primer is designed to improve the durability of Simply Woodcare Uvex Exterior Timber Finish top coat by stabilising the timber from the destructive effects of moisture, mould and fungi. Simply Woodcare Uvex Timber Primer incorporates the latest technology in clear water based timber primers.

Simply WoodCare Wood Cleaner is used to restore greyed or weathered timber to its original appearance and may be used to revitalise water stained or mould affected timber. It can be used on most natural timbers prior to the application of Simply WoodCare stains or clear finishes. Note: Simply WoodCare Wood Cleaner may not remove all stains. It is not recommended for use on colour stained, lacquered or painted surfaces.

An interior, water based wood putty for filling nail holes, cracks and other wood surface blemishes. It can also be used as a grain filler. Simply Woodcare Wood Putty allows matching of a wood colour prior to top coating with the range of Simply Woodcare Clear or Stain and Varnish finishes. It is also suitable for use with Haymes French Polish or other Haymes quality paints. It dries quickly and sets hard, ready for sanding to a smooth finish.

A high quality, interior, ready for use, oil based, semi transparent stain designed to penetrate open grained timber and to enhance the natural timber grain. It is simple to use and easy to apply and is especially suitable for pine, ash and other light coloured furniture timbers.

A premium quality gloss 100% acrylic for use on exterior surfaces. This product has excellent durability, opacity and general resistance to wear and weathering. A limited number of factory milled colours are also available.

An Ultra Premium Matt 100% acrylic for use on exterior masonry surfaces. Matt Solashield is a durable product that can be applied to most masonry surfaces without using a primer.

A methylated spirit based stain sealer especially formualted to meet the need for a very fast drying barrier coatings which is required to prevent the penetration of bleeding stains through subsequent coatings. Where drying time is not critical Haymes Sealer Binder is the preferred option.

A 100% acrylic primer, sealer and undercoat all in one. Suitable for interior or exterior use, this product has excellent gloss hold out, sanding and filling properties. It is easy to apply and shows great performance with top coats. Sanding is not required and it adheres exceptionally well to most substrates. May be over coated with either acrylic or oil based top coats.

Unistrip paint, lacquer and varnish remover is a dichloromethane based product designed to remove most surface coatings.

Haymes Wood Primer is an oil based, self-levelling, high opacity primer for use on interior/exterior timber. It has excellent tannin bleed resistance. Available in white it is suitable for application to weatherboards, window grames, doors, trims and outdoor furniture. Note: This product is not suitable for application to custom wood. Note: Particular attention should be given to the priming of end grain on timber, to ensure that the capillaries are sealed.